Blockout Roller Blinds
Description & Features
- Aluminium roller
- Choice of Left or Right hand controls
- Clutch Driven Chain Mechanism - allows you to stop blind at any position
- Modern Oval Shaped Base Rail
- No side Seams
- Crush/Ultrasonic cutting to prevent fraying (not just cut by knife)
- Chain tidy to keep chain out of harms way
- Made to Australian Child Safety Regulations
- Brackets & Screws provided with your order
- 5 Year Warranty (For oversized blinds see note below)
Origin of Manufacuring -
ACM - Indicates that the blind is an Australian Custom Made product.
ICM - Indicates that the blind is an Imported Custom Made product
Note that the ACM & ICM blinds, will have slightly different components and should not be combined in the same room for aesthetic reasons.
Manufacturing & Delivery Time -
ACM - Manufacturing is approximately 10-15 working days. Plus delivery time 1-5 days depending on area
ICM - Manufacturing is approximately 20-30 working days. Plus delivery time 1-5 days depending on area
Please click on the individual fabrics for specific manufacturing details.
Composition -
All fabrics shown under Blockout Roller Blinds are 100% blockout.
Always keep in mind that due to the nature of Roller Blinds, a small amount of light, will still enter into the room from the top & sides. This is considered minimal and doesn't detract from the overall effectiveness of this product.
Width & Drop Dimensions -
If the fabric does not show in the range selection after you enter your measurements, this indicates that it is not available at the entered size.
|
Min width
|
250mm
|
|
Max width
|
3000mm*
|
|
Min drop
|
400mm
|
|
Max drop
|
2700mm
|
*Maximum width can be exceeded slightly to 3100mm for ACM Focus fabric only, not exceeding 2100mm drop. No warranty can be offered on blinds over the measurements in the table above.
Some fabric restrictions may apply. Widths over 2500 may not have a drop exceeding 2300, Click on individual fabrics for further details.
All Blinds over 2700 width are considered oversized. Due to the nature of roller blinds and not being able to have a central/support bracket, they run the risk of a slight ripple in the cloth. We consider this to be standard for these sizes and it is not considered detrimental to the operation and effectiveness of this product. Therefore we would not accept a warranty claim against this aspect of the blind.
Roll Direction -
Back Rolled – Cloth comes off the back of the roller, close to the glass, away from the room. This is the preferred way to maximise insulation and better light control, also considered standard in the industry. Not recommended for back coated fabrics, as the white will be showing on the top of the roll.
Front Rolled – Cloth comes forward off the roller, away from the glass, into the room. This is ideal for when you have obstructions such as, window winders and door handles. This method also hides the roller and creates a valance finish. Not recommended for face fitted blinds,due to the increased gap down the side of the bind, with the exception of corner windows. Highly recommended for white back coated fabrics.
- You will require a depth of 60mm, for the blind to sit neatly inside the frame.
- Minimum depth 30mm -this will result in the blind slightly projecting out of the recess.
- Make sure to select back rolled fabric when depth is limited.
- Brackets can be mounted into the roof of the recessed frame, or to the sides for tight fits.
Face Fit Projection-
- 80mm. May vary slightly depending on thickness of fabric.
We deduct 5mm from recess width to allow the blind to fit within the frame and to operate correctly.
If you require total glass coverage and want to reduce the side gaps, we recommend you order Face fitted and not Recessed blinds.
Spring Assist -
For ACM blinds, we include a spring assist into the price of all blinds over the width of 2410 when the drop exceeds 1500.
A spring assist is a tensioning spring inside the roller, which helps wind the blind back up. Allowing your blind to operate more easily, therefore extending the life of your blind.
Aluminium roller tube sizes -
Due to roller blinds being supported by brackets at each end of the blind, we only use the best available tubing on the market. All blinds over set sizes have the strengthened tube for added support to prevent sagging in the centre of the blind.
Up to 2100 width 38mm tube
2100 to 2400 width 48mm tube - Heavy Duty
2400 to 3000 width 48mm tube – Super Heavy Duty
Chain Control Sides -
You have the ability to select the control side that best suits you. The 'best side' is worked out whilst standing facing the window.
Chain Lengths -
ICM - All chains are 1 metre long.
ACM - Chain length varies depending on the drop of the blind. See below
If you require a different length for either ACM or ICM, just let us know in the comments field when ordering.
Blind Drop Chain Length
Up to 900 mm 500 mm
901 – 1200 mm 750 mm
1201 – 1500 mm 1000 mm
1501 – 1800 mm 1250 mm
1801 – 2100 mm 1500 mm
2101 - 2400 mm 1750 mm
2401 – 2700 mm 2000 mm
Upon Request 2250mm, 2500mm, 2750mm
Chain Tidy – Child Safety Regulation -
All roller blinds are supplied with a chain tidy. This device is hooked through the loop of the chain and secured to the wall or window frame, reducing the opening for the loop and keeping it out of harms way. It is Law in all states that our customers fix this device to their roller blind chains to prevent the risk of strangulation.
Important. When ordering multiple blinds to butt together on a single window or door, the central blind/blinds must have a point to secure the chain tidy. If this is not possible, then we recommend that you order a multi link system (for ACM blinds only) to eliminate the central chains or order the central blind/blinds with shortened chain/chains that are a minimum of 1.6m off the floor.
Failure to order a Multi Link or have chains <1.6m off the floor when ordering 3 or more butting blinds, will release Blindsonline.com.au from any liability.
All Blinds come with a Child Safety warning label/sticker, please take your time to read through the details supplied to ensure correct application and compliance.
Delivery Charges
A low flat rate of $25, $35 or $45 per order, depending on your postcode.