Flame Retardant & Enviroment Friendly

Technical Info

 Enviroshade Roller Blinds

Product Features

Stylish Base Rails

Easy Lift Operation

Child Safe Chain Tidies

Easy Fit Brackets

 

Features 

• Permanant Fire Retardancy
• Light Filtering Cloth
• Aluminium roller
• Australian components
• Choice of Left or Right hand controls
• Clutch Driven Chain Mechanism - allows you to stop blind at any position
• Continuous looped chain - no ugly joiner
• Powder Coated Base Rail – White, Ivory, Beige, Black & Satin Silver, Shiny Silver
• No side Seams
• Crush/Ultrasonic cutting to prevent fraying (not just cut by knife)
• Chain tidy to keep chain out of harms way
• Made to Australian Child Safety Regulations
• Brackets & Screws provided with your order
• 5 Year Warranty (For oversized blinds see note below)

Fabric Information - Household safety is a major importance and now you can rest assured that our Enviroshade Blinds are made from 100% Trevira CS giving permanent flame retardancy. Unlike other fabrics that recieve a surface treatment, Trevia CS fabrics have the flame retardant properties anchored into the fibre, it is not possible for external influences to effect them, so regular cleaning of your blinds will not alter the flame retardancy.  This also means that your blinds are more enviromentally friendly, as no further fire protection treatment, such as normally combustible materials are needed.  Treatments of this kind are harmful to the environment.

Minimum Width     250mm           Minimum Drop       400mm

Maximum Width  3000mm          Maximum Drop    2700mm

Some fabric restrictions may apply.  All widths over 2500 can not have a drop exceeding 2300. See individual fabrics for further details. 

Please read details on oversized blinds.

Oversized Blinds - All Blinds over 2700 width are considered oversized.  Due to the nature of roller blinds and not being able to have a central/support bracket, they run the risk of a slight ripple in the cloth.  We consider this to be standard for these sizes and it is not considered detrimental to the operation and effectiveness of this product.  Therefore we would not accept a warranty claim against this aspect of the blind.

Light Control - Always keep in mind that due to the nature of  Roller Blinds, a small amount of light, will still enter into the room from the top & sides. This is considered minimal and doesn't detract from the overall effectiveness of this product. 

Cloth Roll Direction - Select from the following

Back Rolled – Cloth comes off the back of the roller, close to the glass, away from the room.  This is the preferred way for maximum insulation and better light control, also considered standard in the industry.

Front Rolled – Cloth comes forward off the roller, away from the glass, into the room.  This is ideal for when you have obstructions such as, window winders, door handles.  This method also hides the roller.   Not recommend for face fitted blinds, with the exception of corner windows speak to our consultants for further advise. 

Recessed Fit - Depth required

60mm, for the blind to sit neatly inside the frame.

Minimum depth 30mm -this will result in the blind slightly projecting out of the recess

Bracket can be mounted into the roof or side of the recessed frame.

Face Fit Projection - 80mm

Bracket Colours - White, Ivory, Beige, Black & Grey

Spring Assist - Important

We include a spring assist into the price of all blinds over the width of 2400 when the drop exceeds 1500. 

Our competitors don't and that's just wrong!

We consider this essential for a high quality blind, that will last many years, and should not be considered as an optional extra. 

A spring assist is a tensioning spring inside the roller, which helps wind the blind back up.  Allowing your blind to operate more easily, therefore extending the life of your blind. 

Aluminium roller tube sizes

Due to roller blinds being supported by brackets at each end of the blind, we only use the best available tubing on the market.  All blinds over set sizes have the strengthened tube for added support to prevent sagging in the centre of the blind.

Up to 2100 width               38mm tube

2100 to 2400 width           48mm tube - Heavy Duty

2400 to 3000 width           48mm tube – Super Heavy Duty

Chain Sizes - All blinds are made with the following chain length, relating to the blind drop. If you require a different length, just let us know in the comments field when ordering.

Blind Drop                      Chain Length

Up to 900 mm                  500 mm

901 – 1200 mm                750 mm

1201 – 1500 mm              1000 mm

1501 – 1800 mm              1250 mm

1801 – 2100 mm              1500 mm

2101 - 2400 mm               1750 mm

2401 – 2700 mm              2000 mm

Upon Request                   2250mm, 2500mm 2750mm

Chain Tidy – Child Safety Regulation

All roller blinds are supplied with a chain tidy.  This device is hooked through the loop of the chain and secured to the wall or window frame, reducing the opening for the loop and keeping it out of harms way.  It is Law in all states that our customers fix this device to their roller blind chains.

Important. When ordering multiple blinds to butt together on a single window or door, the central blind/blinds must have a point to secure the chain tidy.  If this is not possible, then we recommend that you order a multi link system to eliminate the central chains or order the central blind/blinds with shortened chain/chains that are a minimum of 1.6m off the floor.

Failure to order a Multi Link or have chains <1.6m off the floor when ordering 3 or more butting blinds, will release Blindsonline.com.au from any liability.

All Blinds come with a Child Safety warning label/sticker, please take your time to read through the details supplied to ensure correct application and compliance.

Use of this product - This product is recommend for domestic purposes only and is not recommend for commercial applications.