French Stripe Lollipop
Dress up a kitchen window
Geometric prints add a contemporary feel
5 Year Warranty.
Classic Soft Roman
Dress up your rooms by selecting our Classic design Roman Blinds with your choice of soft furnishing fabrics. From traditional prints to bold contemporary fabrics or take a look at our fun kids prints. No matter what the style you will find it all here.
| Energy Efficiency |
 |
| Daytime Privacy |
|
| Evening Privacy |
|
|
Made In
|
(ACM) approx. 20-30 working days*
Click on individual fabrics for specific manufacturing details.
|
Daytime privacy is when the blind is in the down position
Price It
Price can vary depending on fabric selected and added options.
All prices shown are in Australian dollars (AUD) and include GST.
Classic Soft Roman Blinds
Product Features
Sealed side hems with Lathe Rail Base Hem
Clear Cleat & Timber Acorn
Features
- Sealed Side Hems
- Aluminium Rear BattensChoice of Left or Right hand controls
- Optional Brass & Chrome acorn
- Brass & Chrome available with to match cleat
- Made to Australia Child Safety Regulations
- Brackets & Screws provided with your order
Minimum Width 300mm Maximum Width 2700mm
Minimum Drop 600mm Maximum Drop 2400mm
Some fabric restrictions will apply. See individual fabrics for further details.
Blinds over 2400 width are considered oversized and may have slight wavering to the fabric along the pockets. This is considered normal for sewn pocket blinds and not considered a manufacturing fault. To avoid this we recommend ordering multiple smaller blinds.
Restriction on Mounting – Face or Architrave Mount only
We do not recommend Roman Blinds to go into a recess mount (inside the frame) and only to be mounted as a face fit or architrave fit. There are many reasons for this and we make sure to comply with the Australian Soft Furnishing industry guidelines for Roman Blind manufacturing.
Any Roman blinds purchased with the intention of a recess mount will not be covered by our 5 year warranty.
The three main reasons are as follows;
- Roman Blind fabric is known to take time to settle and will eventually make the blind too long for the inside mount. It is impossible to judge the allowance as the variable to the cloth, size and weight of the blind will differ. Achieving the desired 5mm gap at the base of the blind cannot be obtained.
- The cording is behind the blind and to operate you must push the canvas aside to get to them. This will result in damaging the fabric by being crushed and soiled. Operating the blind will eventually burn through the blockout coating due to having to drag the cords diagonally across the rear of the fabric to raise and lower the blind.
- It is rare for a window to be perfectly square and often is out by a few mm’s. This will give the appearance of the blind being crooked and the gap down the side of the blind will aggregate from a few mm’s at the top to a considerable gap to the bottom edge.
Projection of headboard
Standard 40mm’s
Optional 70mm, 90mm 120mm
Operation
Standard Cord & Cleat tie off
Heavy Duty Cord Lock (additional)
Chain Drive (additional)
Cord locks - A simple self locking device. They do have restrictions and are not recommended on blinds that are too small or too large.
Small blinds - as the weight in the blind is not sufficient to release and lower the blind properly.
Large blinds - due to the amount of cords going into the locking device, loosing traction and will not hold into position.
We only recommend on blinds between the sizes of 1200 -2400 width and will not guarantee on blinds outside these sizes.
Chain Drives - A continous looped chain reducing operating effort. Highly recommended for large blinds to make operating easier and to keep the blind level.
Placing on smaller width windows under 900mm's, is generally not recommend due to slowness of operation.
Batten Spaces and Lining up Blinds
Batten spaces are determined by the drop measurement of the blind and different drops will have different panel sizes.
If you have different drops in the same room and would like to have the same panel sizes so the blinds line up visually, you are able to select this option in the Design & Order area. We will then alter the base panels to suit.
Be aware that this may cause risk of fading, due to a smaller batten space becoming necessary at the base panel of the blind.
The face of the Roman Blind will have a fixing batten at every second batten spacing.
Fabrics
Select from our large range of Soft Furnishings Fabrics suitbale for Roman Blinds. The fabric is then attached to a blockout lining before making into the Roman Blind.
Cleaning
General dusting or vacuuming is suitable and should be done regularly.
For spot cleaning, wash with warm soapy water.
Do Not Scrub as you may damage the coating of the fabric.
Make sure to rinse clean with water.
Allow the blind to completely dry before operating.