Face or Recess?

You can choose to have your blind made to fit the inside of the recess of your window or it can hang on the outside of the frame (face).

Face measurement

Face

This is the measurement you need to take if you want your blind to hang outside the window recess. We will make your blind exactly to these measurements including brackets.

Recess measurement

Recess

This is the measurement you need to take if you want your blind to fit inside the window recess. Please provide the total window width and drop of the window reveal. Do not alter the measurements, as our factory will deduct 5mm off the width, for allowances to prevent tight fits. Do not provide existing blind measurements, such as cloth width, as Roller blinds include the bracket allowance into the total width.
Important: Recess mount blinds require the brackets to be mounted into the top of the reveal, as per our fitting instructions. Mounting to the sides for a roller blind, will make the blind too small.

Light Control - The blind will have a small gap, allowing light down the sides of the cloth. If light control is important, then we recommend you face mount your blinds. Honeycomb blinds have the least amount of gap for recess mounts.